Error Code Prompt and Solution of Laser Rangefinder

While using laser distance meters, many people might meet with some errors.

Here I will introduce some common error code prompt and their solutions.

1. B.L

This error code means the battery voltage is to low, and you should charge the laser rangefinder or replace batteries with new ones.

2. T.L/ T.H

This indicates that the ambient temperature is too low/ too high, please warm/ cool the distance meter.

3. D.E

It means the measurement distance is too close, too far or pythagorean measurement error, and you should adjust the distance.

4. S.L / S.H

The code occurs when signal is too weak or too strong, try to measure the target point with stronger/weaker reflective ability.

5. H.F

The H.F means hardwareerror, try to start/ shut down the laser distance meter again. If the error still happens, please contact your local dealer.

These error codes are some common problems you might encounter with a Laser Rangefinder, if you still have any other problems about your Laser Distance Meters, welcome to contact us. We will help you find the problems and solutions.